I can certainly point you in the right direction. This will be a tricky one, as the Dexter 5,200 lb axles can use more than one seal size. We do not have the ability to pull an OEM build sheets to see what parts they installed at the factory so we will need to identify what axles you have installed outside of just the weight rating.
The best way to determine what seal size you will need will be to pull a hub and measure the seal ID with a caliper. Another good way to determine would be... view full answer...
For your 2021 Winnebago Voyage Travel Trailer I recommend the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision, # ASA37YR as it is designed for RVs with factory installed Voyager WiSight technology such as newer model Winnebago's making it a convenient, plug and play system for installation. This camera is equipped with 14 infrared LED night vision lights that produce a clear, quality picture. The lights give you the flexibility to back up your RV as the sun's going down... view full answer...
The Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1 is not available in white, however you could either just paint it white or use the Replacement Handle for LaSalle Bristol Waste Valves # LSB97FR. view full answer...
I spoke to my contact at Roadmaster and they informed me that you should use the 5,000 Lb Rated Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2560 with 5,200 lb axles. I asked about using the 7,000 Lb Rated Roadmaster Comfort Ride Leaf Spring Suspension Kit part # RM-2460-2570 but they stated this would not put enough weight on the system for it to engage properly therefore is not advised.
The Roadmaster Comfort Ride Leaf Spring Suspension Kit we have found in our... view full answer...
Hey Kathleen, yes the Replacement Shark Fin Camera Mounting Bracket part # FRCBRKT-BL is the part you need. You'll wire up the bracket to the wiring of your current pre-wiring setup and once mounted it would be ready for your camera setup that uses Furrion connections. view full answer...
Thank you for the measurements of the equalizers on your 2020 Winnebago Voyage!
Based on the measurements you provided you need the Dexter E-Z Flex Suspension Kit # K71-652-00 which measure 5 5/8" between the bottom holes and 2" tall.
I included a video of the Dexter E-Z Flex # K71-652-00 for you to take a look at. view full answer...
The purpose for the Voyager PWM filter # VGR64VR is not limited too just the Furrion camera setups. It's mostly for the newer GM trucks that are really difficult to use with the RV cameras. If you have a newer GMC or Chevy truck you would want to also get this harness with the Wisight setups like the part # ASA57YR but if you have a different truck you wouldn't need it. view full answer...
The Solera RV Slide-Out Awning in White # LCV000163300 or Black # LCV000168109 will fit your flange to flange measurement of 156" on your 2021 Winnebago Voyage travel trailer.
If you have an awning or other obstruction within 7" of either flange you will need to go with the next size down slide topper. That would require a White # LCV000163299 or Black # LCV000165061 Slide Topper to ensure it does not contact the obstruction. view full answer...
If you're not wanting to drilling into the roof or pull up the mounting screws of the vent then you'll need to use the MaxxAir II RV and Trailer Roof Vent Cover w/ EZClip - Black # MA86JR. This cover comes with mounting brackets that you'll screw into the side of the vent instead and can then use the EZCIips to attach the cover. view full answer...